How to fix indows 10 crash, blue screen, on start up log
Programs will end abruptly and the screen will turn black or blue – such crashes are very rare on Windows 10, but they do occur. Debt are hardware or software errors that can be eliminated with appropriate actions. In our tips + tricks we have compiled the most common causes and solutions for you.
- Check cables and connections
- View event log
- Check your video card
- Control the temperature of your PC
- Replace mainboard battery
- Faulty memory
- Restore Windows 10 with a backup
Check cables and connections
View event log
The Windows 10 event log or event viewer is a built-in system tool that displays all system operations and errors on your computer (Windows 10 crash log). This will help you find out what caused the crash to happen. First, press the key combination [Windows]+ [R] to open the Run dialog. Then, use the eventvwr command to open the event log .
Check your video card
If the graphics card is defective or no longer up-to-date, it can lead to a picture defect at high utilization. In this case, you should replace the graphics card. Sometimes it can happen that the graphics card is not sitting correctly in your slot. The BIOS beep code when starting the PC for the incorrectly recognized graphics card is: one long, two short.
If, on the other hand, the PC crashes at the end of the startup process or a blue screen is displayed when the graphics load is high means windows 10 crash on startup, the cause may be an outdated graphics driver. With just a few clicks you can find out if your video driver is defective. First, press the key combination [Windows] + [R] to open the Run dialog. Then open Device Manager by typing devmgmt.msc in the Run dialog. You will be presented with a list of all available devices. Check this list for individual entries marked with a yellow exclamation mark. If this is the case, right-click on the highlighted entry and select ” Update Driver Software “.
Control the temperature of your PC
If your PC crashes abruptly, it may be due to overheating of the PC. Often it simply turns itself off. Remedy can be the cleaning of the fan or using the new thermal compound. If there are still temperature issues after that, increase your computer’s cooling with larger heatsinks and larger fans.
Replace mainboard battery
If your computer is a bit older, the lithium battery cell on the motherboard may be dead. During the boot process, the error message CMOS Checksum Error appears on the screen. Here only one thing helps: Open the PC and replace the battery.
The memory of your PC can break over time. This results in PC to a blue screen crash. In that case, you should do a Windows Memory Diagnostic. Click Start, type mdsched.exe in the Search box, and then press Enter. Then select ” Restart Now and Check for Problems (Recommended) “. Now Windows restarts and checks the memory for errors. The whole process can take a few minutes. Afterwards the test results will be displayed. If the working memory is defective, it must be replaced. In some cases The RAM not plugged in correctly in slot and you must unplug it and plug it again (first turn off your PC). it 6th case for solve How to fix indows 10 crash, blue screen, on start up log issue.
Restore Windows 10 with a backup
If the cause of the crashes is unclear, the only solution is to recover from Windows 10 with backup.
If you have not backed up Windows 10, you still have the option of restoring the operating system to a pre-crash state with a restore point means system restore.